When your sports car or lowered sedan sits too low for a standard floor jack, a super low profile jack is the solution. We researched the market, compared manufacturer specifications against industry lift standards, and evaluated owner feedback to find jacks that combine low minimum height with adequate lift range, durability, and safety features. Below are our top picks, each with honest assessments of their limitations.
| Photo | Product | Score | Buy |
|---|---|---|---|
|
🚗
|
ARcan XL20 Super Low Profile Aluminum Racing Jack Best Overall 2-ton capacity, 2.5-inch minimum height, 15.5-inch lift range |
9.0 | 🛒 Check Price |
|
🚗
|
Pittsburgh Automotive 2 Ton Low Profile Floor Jack Best Value 2-ton capacity, 3-inch minimum height, 14-inch lift range |
8.4 | 🛒 Check Price |
 |
Daytona 3 Ton Super Duty Low Profile Floor Jack Heavy Duty Pick 3-ton capacity, 3.25-inch minimum height, 20-inch lift range |
8.7 | 🛒 Check Price |
|
🚗
|
Pro-LifT F-767 Greyhound Low Profile Floor Jack Best for Tight Clearance 2-ton capacity, 2.75-inch minimum height, 14.5-inch lift range |
8.1 | 🛒 Check Price |
 |
Torin Big Red T83006 Super Low Profile Steel Floor Jack Budget Heavy Duty 2-ton capacity, 3.125-inch minimum height, 13.75-inch lift range |
7.8 | 🛒 Check Price |
 |
Sunex 6602LP Professional Super Low Profile Floor Jack Professional Grade 2-ton capacity, 2.75-inch minimum height, 15.75-inch lift range |
9.1 | 🛒 Check Price |
 |
Blackhawk B6350 Fast Lift Service Jack Fast Lift Pick 3.5-ton capacity, 3.5-inch minimum height, 18.75-inch lift range |
8.3 | 🛒 Check Price |
1. ARcan XL20 Super Low Profile Aluminum Racing Jack: Best Overall
The ARcan XL20 earned our top spot because it strikes a rare balance: a 2.5-inch minimum height that slides under most lowered cars while still lifting to a useful 18 inches. Owner feedback consistently praises its dual-pump system for raising vehicles quickly, and the aluminum construction keeps it portable. In our evaluation of spec sheets and reviews, we found very few complaints about leaks or failures, suggesting good long-term durability.
That said, the handle assembly has some play when fully extended, which can feel less solid than pricier jacks. If you work on extremely low race cars with side skirts, you may need to slide it carefully. This jack is best for enthusiasts who want a reliable, lightweight jack that won’t break the bank, but if you need absolute rigidity for daily professional use, consider a steel model.
- Ultra-low 2.5-inch saddle height reaches nearly all lowered vehicles
- Dual pump pistons for faster lifting with less effort
- Reinforced aluminum frame weighs only 38 pounds
Pros: Excellent build quality for the price; Smooth operation and easy rolling casters
Cons: Handle can feel slightly wobbly at full extension
2. Pittsburgh Automotive 2 Ton Low Profile Floor Jack: Best Value
The Pittsburgh Automotive jack is a budget-friendly option that still meets the low profile requirement with a 3-inch saddle height. We compared its specs to others and found it offers a decent lift range for most passenger cars. Owner reviews highlight that it works well for occasional oil changes and tire rotations, and the double welded frame provides adequate strength for its rating.
However, this jack is notably heavier than aluminum models, making it less portable. Some users report the casters can be stiff initially, requiring a break-in period. If you are a weekend DIYer on a tight budget, this is a solid choice, but professionals or those lifting heavy vehicles daily should look to a higher-tier option for better durability and ease of rolling.
- Very affordable for a low profile jack
- Double welded construction adds strength
- Quick lift feature reduces pumping
Pros: Great value for occasional DIY use; Lifts most sedans and coupes easily
Cons: Heavier than aluminum alternatives at 50+ pounds
3. Daytona 3 Ton Super Duty Low Profile Floor Jack: Heavy Duty Pick
The Daytona 3 Ton Super Duty jack is for those who need to lift heavier vehicles that are still low to the ground. Its 3.25-inch minimum saddle height is low enough for many lowered trucks, and the 20-inch lift range is exceptional. We researched owner feedback and found near-universal praise for its build quality and smooth lifting even at near-max capacity.
The trade-off is weight: at 88 pounds, this jack is not easily moved around a garage. Additionally, the large footprint may not fit under extremely low sports cars with less than 3 inches of clearance. If you work on heavy trucks or SUVs that are also lowered, this is an excellent choice, but for lightweight cars, a smaller jack will be more convenient.
- Massive 3-ton capacity for trucks and SUVs
- Extra tall lift height reaches 23.25 inches
- Reinforced steel frame with dual pump pistons
Pros: Extremely sturdy and reliable under heavy loads; Lifts higher than most low profile jacks
Cons: Very heavy at 88 pounds, not for portability
4. Pro-LifT F-767 Greyhound Low Profile Floor Jack: Best for Tight Clearance
The Pro-LifT Greyhound is a purpose-built low profile jack with a 2.75-inch saddle height, making it suitable for many slammed cars. We compared its specifications to others and found the rubber saddle pad a nice touch for protecting undercarriage. Owner feedback generally rates it well for ease of use and rolling, especially on smooth garage floors.
However, a subset of reviews mention hydraulic fluid seepage after a year or two of regular use, which can affect performance. Also, the steel frame makes it heavier than aluminum alternatives. This jack is a good fit for the DIY enthusiast with a very low car who wants a dedicated jack, but those seeking long-term reliability may want to invest in a higher-end model.
- Low 2.75-inch saddle height for very low cars
- Rubber saddle pad protects pinch welds
- Steel frame with powder coat finish
Pros: Good clearance for most lowered sports cars; Saddle pad prevents scratching
Cons: Some reports of hydraulic oil leaks after heavy use
5. Torin Big Red T83006 Super Low Profile Steel Floor Jack: Budget Heavy Duty
The Torin Big Red T83006 is a budget-friendly steel jack that offers a 3.125-inch minimum height, which is low enough for many sedans but may not clear some lowered sports cars. We evaluated its specs and found the lift range adequate for most passenger vehicles. Owner reviews often mention it works well for the price, though some note the casters don’t roll as smoothly as pricier jacks.
Durability is a concern: some users report the hydraulic unit failing after a few years of moderate use. Also, the steel frame adds weight. This jack is best for occasional use on standard-height cars, but if you need a super low profile for a modified car, look elsewhere. It’s a decent backup or budget option for basic tasks.
- Low price point for a 2-ton jack
- Steel construction with double pump
- Wide base for stability
Pros: Very affordable; Stable base design
Cons: Minimum height may not fit extremely low cars; Casters can be stiff and noisy
6. Sunex 6602LP Professional Super Low Profile Floor Jack: Professional Grade
The Sunex 6602LP is a professional-grade jack that we found to have some of the best construction quality among the models researched. Its 2.75-inch saddle height and long lift range make it versatile for lowered cars and stock vehicles alike. Owner feedback from mechanics and serious enthusiasts highlights its smooth rolling and effortless lifting, even after years of use.
The main drawback is the premium price, which may be hard to justify for the casual DIYer. Also, at 45 pounds, it is not the lightest aluminum jack, but still manageable. If you want a jack that will last for decades and perform flawlessly, the Sunex is a top contender. However, if you only lift your car a few times a year, the extra cost may not be necessary.
- Professional build with sealed hydraulic unit
- Extra-wide cast iron saddle for stability
- Quick-lift technology reduces pump strokes
Pros: Extremely smooth and reliable operation; Excellent safety features including overload valve
Cons: Higher price point than many competitors
7. Blackhawk B6350 Fast Lift Service Jack: Fast Lift Pick
The Blackhawk B6350 is built for speed and heavy lifting, with a 3.5-ton capacity and dual pump pistons that raise vehicles rapidly. We researched its performance and found it excels for trucks and large SUVs. Its 3.5-inch minimum height, however, excludes most lowered sports cars and sedans.
Owner reviews often mention the jack’s solid feel and reliability, but some note the handle can be stiff to operate. The weight and size make it a garage fixture rather than a portable tool. This jack is ideal for those who work on heavy vehicles and need quick lifts, but if you have a low-clearance car, you’ll need a different jack for that task.
- High capacity for heavy vehicles
- Dual pump pistons for fast lifting
- Wide stance for stability
Pros: Lifts heavy trucks quickly; Stable and sturdy under load
Cons: Minimum height too high for many lowered cars; Heavy and bulky
Frequently Asked Questions
What is a super low profile jack?
A super low profile jack is a floor jack with a minimum saddle height typically under 3 inches, designed to fit under lowered or sports cars with minimal ground clearance. Standard jacks often have a 4-5 inch minimum height, which is too tall for these vehicles.
How do I choose the right capacity?
Choose a jack with a capacity at least equal to half the vehicle’s gross weight (since you lift one end at a time). For most cars, a 2-ton jack is sufficient. For heavier trucks or SUVs, a 3-ton or higher is recommended. Always check the vehicle’s weight and the jack’s rating.
Can I use a super low profile jack on a stock car?
Yes, most super low profile jacks have a lift range that reaches standard ride height vehicles as well. However, they may have a lower maximum height than standard jacks, so ensure the lift range is adequate for your vehicle’s clearance when raised.
Are aluminum jacks better than steel?
Aluminum jacks are lighter and easier to move, but often less durable and more expensive. Steel jacks are heavier but typically stronger and more affordable. For occasional use, aluminum is convenient; for daily professional use, steel may last longer.
What safety features should I look for?
Look for overload valves to prevent exceeding capacity, a wide base for stability, and a safety bypass system. Always use jack stands after lifting, never rely solely on the jack. A rubber saddle pad can also prevent slipping.
Our Verdict
After researching specifications and owner feedback, the ARcan XL20 is our top pick for its exceptional low clearance, decent lift height, and overall value. For those needing a heavier-duty option, the Sunex 6602LP offers professional-grade quality and reliability, making it a strong runner-up.
